static-ip

## Static IP
* List Network Interfaces with `ip a`

```shell
$> ip a

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host noprefixroute
       valid_lft forever preferred_lft forever
2: enp3s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
    link/ether d8:bb:c1:60:e1:89 brd ff:ff:ff:ff:ff:ff
    inet 192.168.1.64/24 brd 192.168.1.255 scope global enp3s0
       valid_lft forever preferred_lft forever
    inet6 fe80::dabb:c1ff:fe60:e189/64 scope link
       valid_lft forever preferred_lft forever
```

* Interfaces:
	* `1: lo`: Loopback address (localhost / 127.0.0.1)
	* `2: enp3s0`: Server Ethernet Port (Can also be something like `eth0`)

* Open interfaces file to set static IP

```shell
sudo nano /etc/network/interfaces
```

* Add / Edit Entry for the Ethernet Port (using name `enp3s0`)

```
allow-hotplug enp3s0
iface enp3s0 inet static
    address 192.168.1.100
    netmask 255.255.255.0
    gateway 192.168.1.1
    dns-nameservers 1.1.1.1 1.1.0.1
```

* Restart Networking Service

```shell
sudo systemctl restart networking
```

* Check Interface IP Address (using name `enp3s0`)

```shell
ip addr show enp3s0
```